DX系列订箱机

DX系列订箱机系结合   同类产品优点，设计而成，具有外观新颖，动作轻快，运转平稳，订箱牢固，使用寿命长等优点。

钉箱机改进了机头结构，它采用电磁离合控制刹车，具有打钉，制动灵活，噪音小等优点。适用于纸箱厂钉制瓦楞纸箱及纸盒之用。能同时按45度倾斜进行单线或双线连续或间断地装钉大、中、小型的纸箱。由手工控制钉在搭接头上的位置，改为机械可调式控位板控拉。由原单臂式改为龙门式而满足了箱片单一方向的运行。为与纸板生产线配套起到   的准备作用，尾钉及钉距的位置，满足出口用纸箱钉箱的各种标准要求。这类机器又分为：单片钉箱机和双片钉箱机。

DX series binding machine system combines the advantages of similar products at home and abroad, carefully designed, with a novel appearance, light action, smooth operation, set the box firmly, long service life, etc..

Nail box machine to improve the structure of the nose, it uses electromagnetic clutch to control the brake, with a fast speed, brake flexible, low noise, etc.. For the use of cardboard box factory nail system for corrugated boxes and cartons. At the same time according to the 45 degree tilt of single or double line continuous or intermittent loading of large medium and small carton. The position of the overlapping head is controlled by the hand, and the machine can be controlled to be controlled by the adjustable control board. The original single arm type to Longmen and meet the single direction of the operation box. To prepare and cardboard production line supporting, to ensure that the tail nail and nail from the position, meet the export with nail carton box of a variety of standards. This machine is divided into: single nail box machine and double plate nail box machine.

现有钉箱机存在不足：

1、人工递送箱片钉距质量不稳定。

2、易出钉伤事故。

3、因设备型号和内部结构不同，机头不能互换(有时同厂同型号机头也不能互换)，这很不利于维修。

4、脚控离合尾钉位置不准。

5、钉箱要多次重复同样、单调的动作，工人劳动强度大且生产效率偏低。

6、机头与毡座空隙决定着可钉纸板厚度。由于所钉厚度不能变，纸板再薄也要走程，纸板稍厚便感"心有余而力不足"，明显影响钉箱质量和速度。

DX系列订箱机技术参数：